|
Product Information
The Xantrex XW Auto Generator Start (XW AGS) will automatically activate a generator to provide an XW Series Hybrid Inverter/Charger with power to recharge a depleted battery bank or provide additional power for heavy loads. The XW AGS adds intelligence to generator management, thereby eliminating time spent monitoring batteries and inverter loads. It does this by continuously monitoring the battery voltage, state-of-charge, or the inverter charge mode, starting and stopping the generator when the battery needs additional charging. The XW AGS will also start the generator to assist the system's inverter/charger(s) when output power demands are high.
The XW AGS can be customized to suit each user's preferences. The user can define whether the generator should be activated by low-battery voltage, state-of-charge, thermostat operation, or load on the inverter(s). A quiet-time setting prevents the generator from starting at inconvenient times. LED lights display the status of the XW AGS, while all user-defined settings are programmed through the XW system control panel (XW SCP).
Operational Features:
- Compatibility the XW AGS connects to other Xanbus-enabled XW System devices without requiring additional hubs, control cards, or other device-specific control panels
- Works with AC or DC generators with either two-wire or three-wire start controls
- Configurability comprehensive customizable triggers based on low-battery voltage, change in charging state, high inverter load, thermostat signals, planned exercise periods, max run-time, and quiet-time settings
- Non-volatile memory preserves XW AGS settings even if the network power is interrupted or network communication is disrupted
Note: The XW AGS requires an XW System Control Panel (XW SCP) for configuration and monitoring.
Features:
- LED display showing at-a-glance status
- 20-contact generator connector and three built-in relays support 13 preset generator configurations
- Built-in emergency shutdown
- Xanbus-enabled
Interfaces with:
XW Hybrid Inverter/Chargers, XW Solar Charge Controllers, and XW System Control Panel
Specifications
| Product Specifications |
|
| Nominal input network voltage |
15 Vdc |
| Maximum operating current |
200 mA |
| Communication physical layer |
Two, CAN |
| Relay contact voltage rating |
12 Vdc, 30 Vdc max |
| Maximum relay contact current |
5 Adc |
| Communication protocol |
Xanbus |
| Maximum cable length |
130 (40 m) |
|
|
| Mechanical Specifications |
|
| Dimensions (H x W x D) |
3.75 x 5.75 x 1.5 (95.5 x 146 x 37 mm) |
| Shipping weight |
1.70 lb (0.77 kg) |
| Dimensions (shipping) |
10.5 x 8.5 x 2.5 (267 x 216 x 64 mm) |
| Connectors |
Two Xanbus RJ45-8 pins |
| |
One 20-contact pluggable connector |
| |
(Tyco Mate Lok two connector) |
| |
- Wiring harness included |
| Mounting |
Wall mount, 4 x #6 screws included |
| Standard warranty |
Five years |
| Part number |
865-1060 |
|
|
| Environmental Specifications |
| Enclosure type |
Indoor |
| Operating temperature range |
-4 to 122F (-20 to 55C) |
| Storage temperature |
-40 to 185F (-40 to 85 C) |
|
|
| Optional Accessories |
|
| Network cables: |
|
| 3 feet (0.9 m) |
809-0935 |
| 25 feet (7.6 m) |
809-0940 |
| 50 feet (15.2 m) |
809-0941 |
| 75 feet (22.9 m) |
809-0942 |
|
|
| Regulatory Approvals |
|
| Safety |
CSA certified to CSA 107.1-01 and UL 458 |
| |
4th Ed. including the Marine Supplement |
| EMC |
FCC Part 15B Class B Industry Canada, |
| |
ICES-0003 Class B | Specifications subject to change without notice.
|
