Outback Power Systems Sealed Inverter Charger FX2012MT discount price Tekris Power Inverters and Chargers
Shopping Cart:
$0.00
 
»  Inverter/Chargers
»  Batteries
»  Panel Systems
»  Magnum Repair Parts
»  Generators
»  Alternators/Regulators
»  Repaired/Re-Stocked
»  CLEARANCE
»  Custom Solutions
»  Renewable Energy
 
 
Notify me of updates to Outback Sealed Inverter Charger FX2012MT
 
 
 
Tell someone you know about this product.
 
 
 

Outback Sealed Inverter Charger FX2012MT
[FX2012MT]

$2,369.00
$2,132.10

Sealed True Sinewave Inverter/Charger survives harsh environments

The OutBack M-Series inverter/charger is an all-in-one mobile power solution. It incorporates a true sinewave inverter, intelligent battery charger and an AC transfer switch which includes a 30 amp pass through and automatic neutral/ground switching.

All M-Series inverter/chargers produce virtually distortion free AC power for all your mobile electrical needs. Industry leading surge power starts multiple heavy loads simultaneously without the need to run your generator. Innovative power factor corrected battery charging uses multiple stages to recharge your batteries quickly so your generator runs less. Ultra fast AC transfer switch with battery charger back off circuitry allows you to seamlessly take full advantage of your shore cord. OutBack's modular design makes expanding your power system as easy as adding an additional inverter/charger. Integrated network communications makes system setup and monitoring easy through a single MATE controller. Very quiet operation allows mounting in noise sensitive areas, even under a bunk. Repairs in the field are easy thanks to a simple three circuit board design.

The Sealed Outback M-Series inverter/charger is the most rugged design in the world. Conformal coated circuit boards, powder coated die-cast aluminum chassis resist corrosion. No other inverter/charger can operate in extreme climate conditions such as highly corrosive salt air, and achieve the same level of reliability and performance as the sealed M-series.

The Vented Outback M-series has the same proven technology and conformal coated circuit boards as the sealed version but offered in a vented chassis for higher power output. The fully screened "bug-proof" openings keep the power conversion components cool in very hot environments even when operated at high power for extended periods in more protected environments.

Unique networked communication is built into all OutBack products providing complete integration. Expanding your system with your growing power needs is as simple as adding additional inverters with modular architecture. Further flexibility is provided with the ability to be connected at any time in either parallel, series or three-phase power configurations. Industry leading OutBack reliability is achieved through simplified design and rugged construction.

Product Specifications
  • 2000 VA continuous power rating and 4800 VA surge rating
  • 12 VDC input and 80 Amps DC charger
  • True sinewave output
  • Corrosion resistant circuit boards
  • Neutral ground switching
  • 56 pound weight
  • 13" x 8.25" x 16.25" dimensions
  • Two year warranty, five year optional

Optional Accessories
  • The MX60 MPPT charge controller ensures that your solar array is operating at its peak power point regardless of age, shading or environmental conditions.
  • The MATE system controller and display remotely manages and monitors multiple inverter/ chargers, MX60s and any future OutBack power conversion and control products. 
  • The OutBack HUB4 communicates stacking, load share and power save off/on signals.

In addition to this inverter from Outback Power Systems, Tekris Power carries a full line of Outback Power Systems inverter / chargers and accessories.

Sealed Vented
Nominal DC Input Voltage
12 VDC
24 VDC
32 VDC
12 VDC
24 VDC
32 VDC
Continuous Power rating at 25 C
2000 VA
2500 VA
2500 VA
2800 VA
3500 VA
3200 VA
AC Voltage/Frequency 120 VAC 60 Hz
Continuous AC RMS Output
17.0 amps AC
20.8 amps AC
20.8 amps AC
23.3 amps AC
29.2 amps AC
26.6 amps AC
Idle Power (Full)
20 watts
20 watts
21 watts
20 watts
20 watts
21 watts
Idle Power (Search) 2.6 watts
Typical Efficiency
90%
92%
92%
90%
92%
92%
Total Harmonic Distortion (Typical) 2%
Total Harmonic Distortion (Max) 5%
Output Voltage Regulation +/- 2%
Maximum Output Current (peak)
56 amps AC
70 amps AC
56 amps AC
56 amps AC
70 amps AC
56 amps AC
Maximum Output Current (RMS)
40 amps AC
50 amps AC
40 amps AC
40 amps AC
50 amps AC
40 amps AC
AC Overload Capability (Surge)
4800 VA
6000 VA
4800 VA
4800 VA
6000 VA
4800 VA
AC Overload Capability (5 second)
4000 VA
4800 VA
4000 VA
4000 VA
5000 VA
4000 VA
AC Overload Capability (30 minutes)
2500 VA
3200 VA
2500 VA
3200 VA
4000 VA
4000 VA
AC Input Current Maximum 30 amps AC
AC Input Voltage Range
MATE adjustable
80 to 150 VAC
AC Input Frequency Range 54.0 to 66.0 Hz
DC Input Range
10.5 to 17.0 VDC
21.0 to 34.0 VDC
28.0 to 45.3 VDC
10.5 to 17.0 VDC
21.0 to 34.0 VDC
28.0 to 45.3 VDC
Continuous Battery Charge Output
80 amps DC
55 amps DC
35 amps DC
125 amps DC
85 amps DC
45 amps DC
Recommended battery cable
#4/0 AWG
#2/0 AWG
#2/0 AWG
#4/0 AWG
#4/0 AWG
#2/0 AWG
Recommended battery type Flooded lead acid, AGM, gel
Warranty Standard 2 year / Optional 5 year
Certifications ETL listed to UL458
Weight 56 lbs (25 kg) 54 lbs (25 kg)
Unit Dimensions 13 x 8.25 x 16.25 (33 x 21 x 41 cm) 12 x 8.25 x 16.25 (30 x 21 x 41 cm)

You are currently viewing the Outback FX2012MT sealed inverter

 Optional related products 
Outback HUB4 Communication Manager
 Outback HUB4 Communication Manager
@ $195.00
Outback FlexMax 60 Charge Controller
 Outback FlexMax 60 Charge Controller
@ $749.00
Outback Remote Temperature Sensor
 Outback Remote Temperature Sensor
@ $29.95
This product was added to our catalog on Tuesday 27 March, 2007.
Reviews
  Customers who bought this product also purchased  
Outback Remote Temperature Sensor
Outback Remote Temperature Sensor