 Introducing the RD Series Inverter/ Charger - a new generation inverter designed specifically for offgrid use. The RD Series is powerful, easy-to-use, and best of all, cost effective. Install the RD Series in four easy steps: Simply connect the inverter's output to your distribution circuits or electrical panel, connect your power cable (AC) to the inverter's easy-to-reach terminal block, connect the batteries, and switch on the power.
Product Features
- Safe and reliable: The RD Series is ETL Listed to the stringent requirements of UL/cUL 1741, ensuring that the inverter is safe and reliable.
- Easy-to-install: Install the RD Series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your power cable (AC) to the inverter?s easy-toreach terminal block, connect the batteries, and switch on the power.
- Efficient: The sine wave charger efficiently charges your batteries even at low AC voltage, while the modified sine wave inverter keeps the cost down. Additionally, the battery temperature sensor works with the charger for optimum battery charging.
- Choices: The RD Series comes in three power models, allowing you to choose the model that is right for you.
- Upgradeable memory: The inverter is designed with Flash programming for easy memory upgrades.
- Versatile mounting: Mount the RD Series on a shelf, wall, or even upside down.
- Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple ports: The RD Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Accessible design: The extra large AC access cover with terminal screw block and 360 DC connection terminals with covers make this inverter more accessible when it needs to be.
- Convenient switches: The RD Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded transfer relay: 60 Amp transfer service is available on all models.
- Buy with ease: The RD Series is backed by a two-year (24-month) limited warranty.
Product Specifications
- 1800 watts modified sine wave AC output
- 50 amps five-stage DC charger
- Shelf, Bulkhead or Upside Down Mounting
- Modified S ine Wave Output
- Power Factor Cor ected Charger ( Sine Wave)
- R S 485 Communication Port
- Remote Port
- Flash Programming
- ON/OFF Inverter -mounted Switch with LED Indicator
- 60 Amp Transfer ( on Dual IN / Dual OUT Models )
- Extra Large AC Access Cover with Terminal Screw Block
- 360 degree DC Connection Terminals with Covers
- Battery Temperature Sensor - for optimum battery charging ( optional)
- Aluminum Cover
- Smooth, Aesthetically Pleasing Design
- 12 volt or 24 volt configurations available
Optional Equipment
- Remote Control ME-RC50 - for convenient finger tip operation
- AGS Modules - automatically starts and stops your generator
- Smart Shunt - provides precise DC voltage and current measurements
- Stacking Cable Kit - designed to accommodate dual inverter configurations.
In addition to the RD 1824, Tekris Power carries a full line of Magnum Energy inverter/chargers and accessories.
| Inverter Specifications
|
|
|
|
|
| Input Battery Voltage
|
9 ? 16 VDC
|
18 - 32 VDC |
| Nominal AC voltage |
120 VAC |
| Output Frequency |
60 Hz +/- 0.005% |
| 5 second surge power (real watts) |
3700
|
4000
|
6000
|
9000 |
| Continuous Power Output |
2200 VA
|
1800 VA
|
2800 VA
|
3900 VA |
| Rated input battery current |
191.0 ADC
|
88 ADC
|
133 ADC
|
188 ADC |
| Inverter efficiency |
95%
|
94%
|
93%
|
93% |
| Transfer Time |
16 msecs |
| Search Mode (with remote)
|
0.2 ADC
| 0.3 ADC |
| No Load (120 VAC output)
|
0.87 ADC
|
0.5 ADC
|
0.6 ADC
|
0.6 ADC |
| Waveform
| Modified Sine Wave |
|
Charger Specifications
| |
| Continuous Output
|
110 ADC
|
50 ADC
|
80 ADC
|
105 ADC |
| Charger Efficiency
|
85%
|
85%
|
85%
|
92% |
| Power Factor
|
0.95 |
| Input rated current at rated output
|
15.0
|
15.0
|
21.0
|
29.5 |
|
General Features and Capabilities
| |
| Transfer relay capability
|
2 legs at 30 A for 120 V/30 A or 240 V/60A Service |
| Five Stage Charging Capability
|
Bulk, Absorb, Float, Equalize, and Battery Saver |
| Battery Temperature Compensation
|
With available temp sensor (battery temp 0 - 50 C) |
| Remote inverter on/off switch
|
With available pigtail to connect to dry contact |
| Internal cooling
|
0 to 120 cfm variable speed drive using dual 92mm brushless DC fans |
| Overcurrent protection
|
Yes, with two overlapping circuits |
| Overtemperature protection
|
Yes, on transformer, MOSFETs, and battery |
Conformal Coating on PCBs
for corrosion protection
|
Yes |
Powder coating on chassis & top
for corrosion protection
|
Yes |
Stainless Steel fasteners
for corrosion protection
|
Yes |
| Environmental Specifications
| |
| Operating temperature
|
-20 C to + 60 C (-4 F to 140 F) |
| Non operating temperature
|
-40 C to +70 C (-40 F to 158 F) |
| Operating humidity
|
0 to 95% RH non condensing |
| Physical Specifications
| |
| Dimensions
|
13.75" x 12.65" x 8.0" (34.9 cm x 32.1 cm x 20.3cm) |
| Mounting
|
Shelf (top or bottom up) or bulkhead (vents up) |
| Weight
|
38 lb (17 kg)
|
38 lb (17 kg)
|
42 lb (19 kg)
|
45 lbs (20 kg) |
| Max operating altitude
|
15,000 feet (4570m) |
You are currently viewing the RD1824
|
