|
Monitor Two Battery Banks and Control Your Freedom Inverter/Charger
TEKRIS HAS THE SOLUTION FOR YOUR LINK 2000R REPLACEMENT!
Link2000R Replacement Kit ~
You will receive the following products:
(1) 84-2056-01 - Freedom Remote Control Panel (Basic Remote) Provides Battery Status and Freedom Inverter/Charger Remote Control: The Freedom Series Basic Remote Control Panel allows you to control your Freedom Combi, Freedom 458 and Freedom Marine Series Inverter/Charger system from any convenient location. It is easy to read, operate and install, and all controls can be accessed directly from the front panel.
Protection Features
- Independent invert and charge on/off controls
- Push button control of power sharing, equalizing, battery set-up
- Multi-colored LED displays battery state of charge, fault conditions, AC input, DC voltage and DC amperage
- LED warning indictors for low battery and overload warning
- Splash resistant design
- Incoming AC breaker selection allows programmable power sharing
- Easy to install
- One year warranty
(1) 84-2030-00 - LinkLite Battery Monitor
The LinkLITE battery monitor can measure currents up to 1,000Amps. It selectively displays voltage, charge and discharge current, consumed amphours and remaining battery capacity. It is equipped with an internal programmable alarm relay, to run a generator when needed or to turn off devices when the battery voltage exceeds programmable boundaries.
Defining the amount of energy available in a battery is a complex task since battery age, discharge current and temperature all influence the actual battery capacity. High performance measuring circuits, along with complex software algorithms, are used to exactly determine the remaining battery capacity. A new shunt selection feature enables the LinkLITE to measure currents up to 1,000Amps respectively.
The LinkLITE selectively displays voltage, charge and discharge current, consumed amphours and remaining battery capacity. Using a clear backlit LCD Display and an intuitive user interface, all parameters can be recalled with just a button press. A second battery input is also provided to monitor voltage on a second battery.
It is equipped with an internal programmable alarm relay, to run a generator when
needed or to turn off devices when the battery voltage exceeds programmable boundaries.
Performance Features
- Read your battery bank like a fuel gauge
- Provides critical information about the status of your battery bank
- Displays voltage, current, consumed amphours and remaining battery capacity
- Secondary battery bank voltage monitoring
- Auto sensing battery voltage inputs
- Large backlit LCD Display
- Quick nut mounting construction
- Programmable alarm relay
- Shunt selection capability enables flexible system integration
- Splash proof frontpanel
- 500 Amp shunt included
- CE and e-mark certified
(1) MC-612-H - Balmar Max Charge Voltage Regulator: Balmar's Max Charge regulators feature custom selectable preset programs for five battery technologies, standard flooded, deep-cycle flooded, gel, AGM, spiral wound, plus a default factory safe program and a separate program for vessels with voltage sensitive halogen systems. Advanced programming modes add greater user control. Easy-to-read LED numeric display. Dash and aux. lamp functions. Stator/tach terminals. Programming tool included. MC-612-H and MC-624-H include 54" wiring harness. For use on P-type alternators. Temperature sensing requires optional temperature sensors. One year limited warranty.
Series Specifications:
- Selectable Program Presets: UFP (Factory Default), FDC (Flooded Deep Cycle), Gel, AGM, OPS (Optima), Standard Flooded, Halogen
- Charging Stages: Delay/Soft Ramp, Bulk, Calculated Bulk, Absorption, Calculated Absorption, Float. Calculated Float
- Dimensions: 4.8L x 3.25W x 1.5T; Wiring Harness 54" (Includes power, ign., stator, field, ground [2], sense wire pigtail [12-V only])
- Temperature Sensing:Batteries (2), Alternator (1); REQUIRES OPTIONAL TEMPERATURE SENSOR CABLES
Model Specifications:
- Includes harness
- 10A / 1A fusing
(1) MC-TS-A - Alternator Temperature Sensor
With the Alternator Temperature Sensor installed, the Max Charge and ARS -4 voltage regulators can monitor the alternator and respond if ambient temperature conditions are detected. Once an over-temperature condition is detected, the regulator will reduce alternator field current to 50%. This will reduce the amperage output and horsepower load on the engine and belts , thus , giving the alternator an opportunity to cool to normal operating temperatures.
At the same time, the regulator will send the Dash Lamp terminal to ground, allowing the operator to identify a potential system problem if a dash warning light or audible alarm are used in conjunction with the Dash Lamp circuit.
(1) MC-TS-B - Battery Temperature Sensor
In addition to its ability to completely discontinue charging when a thermal runaway condition is detected at your battery, the regulator can also modify charging voltage to compensate for smaller changes in ambient battery temperatures (temperature compensation is only available on Battery #1 terminals -- battery #2 terminals react only to over-temperature conditions ).
In addition to shutting down charging in a catastrophic over-temperature condition, the regulator will s end the Dash Lamp terminal to ground, allowing the operator to identify a potential system problem if a dash warning light or audible alarm are used in conjunction with the Dash Lamp circuit.
Pictures of all products are below.
|
