 Modified sinewave inverters with charger available for 12 Volt DC input from Magnum Energy!
Founded by the same people that introduced the Trace Engineering Inverters in 1985, Magnum Inverters offer premium performance at economical prices. Ideal for RV, small rural cottages and marine use. The Magnum inverters are perfect for RV'ers or rural residents wishing to run a generator or other 120 volt AC hookup for backup power. Magnum's innovation is a Power Factor Corrected Sinewave Charger that works equally well on low generator or shorepower voltages and uses significantly less AC amps at full output. For example, Magnum Chargers need only 15 amps of AC power to deliver 100 DC amps of charge current, compared to 23 amps with competitive products.
Magnums include "Next Generation" battery chargers offering to reduce generator run time by up to 40% over competitive products. The result for RV and Marine users: more quiet time and less fuel. They have easy-to-access AC and DC connections for quick installation. The optional remote is attractive and easy to use, yet allows full access to inverter setup parameters. Their rugged design offers unsurpassed reliability and all models are marine compatible with corrosion resistant materials. Product Features
- Efficient:The sine wave charger efficiently charges your batteries even at low AC voltage, while the modified sine wave inverter keeps the cost down. Additionally, the battery temperature sensor works with the charger for optimum battery charging.
- Choices: The ME Series comes in three power models in 12 volt configuration, allowing you to choose the model that is right for you.
- Upgradeable memory: The inverter is designed with Flash programming for easy memory upgrades
- Versatile mounting: Mount the ME Series on a shelf, bulkhead, or even upside down.
- Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance
- Multiple ports: The ME series provides multiple ports, including an RS485 communication port for network expansion and a remote port.
- Accessible design: The extra large AC access cover with terminal screw block and 360? DC connection terminals with covers make this inverter more accessible when it needs to be
- Convenient switches: The ME Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded transfer relay: 60 Amp transfer service is available on all models
Product Specifications
- Four stage battery charging including "Battery Saver" and equalize modes
- Fully adjustable load sharing
- 60 Amp dual transfer switching to accommodate 120/240 V service
- Aluminum case & conformal coated circuit boards
- Easily field serviceable with replaceable boards
- Stackable for 120/240 VAC output
- 36 month warranty
- Dimensions: 35 x 32 x 20 cm or 13.8 x 12.7 x 8" high,
Options
- A charge controller is required to charge batteries with a solar array (not included). A charge regulator may also be used (with less efficiency).
- An automatic generator starter (AGS Modules)is available to switch on generator AC power automatically when battery DC voltage gets below a certain level (starter voltage, run time, time and/or start temperature can be set on starter).
- Remote Control ME-RC50 - for convenient finger tip operation and allows full programming of inverter setpoints, generator settings and displays battery voltage and inverter output.
In addition to the ME3112, we carry a full line of Magnum Energy inverters as well as remote controls and other accessories
| Inverter Specifications
| ME2012
| ME2512
| ME3112 |
| Input Battery Voltage
|
12.6 VDC |
| Nominal AC voltage |
120 VAC |
| Output Frequency |
60 Hz +/- 0.04% |
| 5 second surge power (real watts) |
3700
|
5000
|
6000 |
| Continuous Power Output |
2000
|
2500
|
3000 |
| Rapid input battery current |
191.0 ADC
|
239.1 ADC
|
296.5 ADC |
| Inverter efficiency |
95%
|
91%
|
90% |
| Transfer Time |
16 msecs |
| Search Mode |
.2 ADC |
| No Load
|
0.87 ADC
|
0.95 ADC
|
0.98 ADC |
| Waveform
| Modified Sine Wave |
|
Charger Specifications
| |
| Continuous Output
|
100 ADC
|
120 ADC
|
160 ADC |
| Charger Efficiency
|
85% |
| Power Factor
|
0.98 |
| Input rated current at rated output
|
15
|
18
|
21 |
|
General Features and Capabilities
| |
| Transfer relay capability
|
2 legs at 30 A for 120 V/30 A or 240 V/60A Service |
| Five Stage Charging Capability
|
Bulk, Absorb, Float, Equalize, and Battery Saver |
| Battery Temperature Compensation
|
With available remp sensor (battery temp 0 - 50 C) |
| Remote inverter on/off switch
|
With available pigtail to connect to dry contact |
| Internal cooling
|
0 to 120 cfm variable speed drive using dual 92mm brushless DC fans |
| Overcurrent protection
|
Yes, with two overlapping circuits |
| Overtemperature protection
|
Yes, on transformer, MOSFETs and battery |
Conformal Coating on PCBs
for corrosion protection
|
Yes |
Powder coating on chassis & top
for corrosion protection
|
Yes |
Stainless Steel fasteners
for corrosion protection
|
Yes |
| Dual AC branch rated output breakers
|
Optional on the ME2012 - AC breaker in 20 or 15 amp ratings |
| Environmental Specifications
| |
| Operating temperature
|
-20 C to + 60 C (-4 F to 140 F) |
| Non operating temperature
|
-40 C to +70 C (-40 F to 158 F) |
| Operating humidity
|
0 to 95% RH non condensing |
| Physical Specifications
| |
| Dimensions
|
13.75" x 12.65" x 8.0" (34.9 cm x 32.1 cm x 20.3cm) |
| Mounting
|
Shelf (top or bottom up) or bulkhead (vents up) |
| Weight
|
38 lb (17 kg)
|
42 lb (19 kg)
|
45 lbs (20 kg) |
| Max operating altitude
|
15,000 feet (4570m) |
You are currently viewing the ME3112
|
