|
No Messy Wiring. Quick Installation. Minimal Battery Drain.
The new generation Freedom HF is equipped with quick-connect AC terminals and ignition lockout capability. The quick-connect AC terminals enable quick installation eliminating the need for strain relief clamps. The ignition lockout feature helps to minimize battery drain by disabling the inverter when the ignition is turned off.
The Freedom HF Inverter/Charger is one of the smallest, lightest, and most affordable inverter/chargers in the market today. The Freedom HF Inverter/Charger features modified sine wave output and is designed to operate entertainment systems and small appliances in boats, RV’s and trucks. The Freedom HF is available in three models: 1000 watts with a 20-amp charger, 1000 watts with a 55-amp charger and 1800 watts with a 40-amp charger..
Features:
-
Designed to power demanding loads such as microwave ovens, TVs, DVD players, small appliances and other electronic equipment
-
Removable digital display pre-attached with 25’ extension cable for remote system monitoring
-
Automatic three-stage battery charger
-
Designed to be hardwired using a terminal strip, or by connecting AC through GFCI
receptacles (included)
-
Built-in 30-amp relay to automatically transfer between inverter power and incoming
AC utility power
Protection Features:
-
Battery over-voltage and under-voltage protection
-
Over-temperature shutdown
-
Automatic overload protection
-
Short-circuit protection
-
Ground-fault protection
-
ETL certified to UL458 for use in mobile RV and commercial applications
Specifications:
|
Electrical Specifications - Inverter |
|
|
| |
|
|
| Models |
HF 1000 |
HF 1800 |
| |
|
|
| Output power (continuous) |
1000 W |
1800 W |
| Surge power |
2000 W |
3600 W |
| Output frequency regulation |
60 Hz |
60 Hz |
| Inverter voltage regulation |
115 +/-10 Vrms |
115 +/-10 Vrms |
| Output wave form |
Modified sine wave |
Modified sine wave |
| Efficiency (full load) |
> 80% |
> 80% |
| Peak efficiency |
> 87% |
> 87% |
| No-load current draw (idle mode) |
< 1 Adc |
< 1 Adc |
| Off mode current draw (display off) |
< 1 mA |
< 1 mA |
| |
|
|
| Electrical Specifications - Charger |
|
|
| Charge rate |
20 A |
40 A |
| AC input voltage range |
95 130 Vac |
|
| AC transfer relay |
30 A |
30 A |
| Battery voltage (nominal) |
12 Vdc |
12 Vdc |
| Battery voltage range |
10.5 15.5 Vdc |
10.5 15.5 Vdc |
| Low battery cut-out |
10.5 Vdc |
10.5 Vdc |
| AC input (max. charge) |
5 Aac |
9 Aac |
| Default bulk charge voltage setting |
14.2 Vdc |
14.2 Vdc |
| Default float charge voltage setting |
13.5 Vdc |
13.5 Vdc |
| Equalize charge voltage (wet cell only) |
N/A |
N/A |
| Battery charge outputs |
One |
One |
| Charge control |
Three-stage |
Three-stage |
| Battery type settings |
Flooded / Gel / AGM / Fixed 13.5 Vdc |
Flooded / Gel / AGM / Fixed 13.5 Vdc |
| Equalization |
No |
No |
| Internal temperature-sensitive charging |
Yes |
Yes |
| |
|
|
| General Specifications |
|
|
| Optimal operating temperature range |
32F to 104F (0C to 40C) |
|
| Optional remotes |
Detachable display |
Detachable display |
| Unit weight |
10 lb (4.5 kg) |
12.8 lb (5.8 kg) |
| Unit dimensions (H x W x L) |
4.2 x 9.5 x 15.5 |
4.2 x 9.5 x 18.0 |
| |
(106 x 241 x 393 mm) |
(106 x 241 x 457 mm) |
| Warranty |
Two year |
Two year |
| Part number |
806-1020 |
806-1840
|
| |
You are currently viewing the Xantrex Freedom HF 1800 inverter/charger.
|
